MKH 20-P48 - RF microphone (omnidirectional, condenser) with switchable -10 dB pad & diffuse/near field high frequency switch (+6 dB @ 10 kHz), 48 V phantom power & 3-pin XLR-M.
Model: MKH20P48
Part #: 002857
Exceptionally flat frequency response, switchable for near and diffuse field applications
High-frequency response can be accentuated by means of a pressure build-up ring
Slightly increasing directivity at high frequencies to adjust tonal balance
Exceptionally low inherent self-noise
Transformerless and fully floating balanced output
Omni-directional RF condenser microphone. Ideal as a main microphone for orchestras and solo instruments. Picks up the natural acoustics of the room. Exceptionally low inherent self-noise. Light metal body.
Exceptionally flat frequency response, switchable for near and diffuse field applications
High-frequency response can be accentuated by means of a pressure build-up ring
Slightly increasing directivity at high frequencies to adjust tonal balance
Exceptionally low inherent self-noise
Transformerless and fully floating balanced output
Switchable pre-attenuation
Black, anodised light metal body
Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Spec Sheet available - Yes
Mic Maximum Frequency Response:
20 kHz
Mic Maximum Frequency Response:
20000 Hz
Mic Minimum Frequency Response:
12 Hz
Mic Minimum Frequency Response:
0.01 kHz
Impedance:
150 ohm
Maximum SPL (Sound Pressure Level):
134 dB
Current Draw:
0.20 Amps
DC Voltage:
48 Volts
Noise:
10 dB
MZH 20-1
- MZH 20-1 - Long hair wind muff for use with MZW20-1 blimp windscreen (13 oz)
