The XTENDEX® 4K HDMI USB KVM Over IP Extender provides remote KVM (USB keyboard, USB mouse, and 4Kx2K HDMI monitor) access to a USB computer up to 394ft (120m) over a Gigabit network using a single CAT5e/6/6a/7 cable. The extender consists of the ST-IPC6FOUSB4K-L-POE local unit that connects to a computer and the ST-IPC6FOUSB4K-R-POE remote unit that connects to an HDMI monitor, USB keyboard, and USB mouse.
The local and remote units can be connected together for a Point-to-Point connection via CATx cable, or a Point-to-Many or Many-to-Many connection via a Gigabit network switch.
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 @30Hz, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
- Cascade network switches to extend the length long distances.
- HDMI features supported:
- HDMI 1.4
- RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0
- LPCM 5.1/7.1, Dolby Digital, and DTS
- Bandwidth up to 340 MHz (10.2 Gbps)
- HDCP 1.4 compliant.
- Two USB 2.0 ports for keyboard, mouse, flash drive, or touchscreen display.
- Keyboard and mouse are hot-pluggable.
- Power over Ethernet (PoE) – power supply not required at the local or remote unit when used with a switch that supports PoE.
- Supports video wall installations from 1x2 to 8x16 screens.
- Displays can be rotated 90, 180 and 270°.
- Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required if using a managed network switch.)
- Bi-directional IR control from input and output locations.
- Manage transmitter/receiver connections and video wall configuration with built-in software or DIP switches.
- Supports full-duplex RS232 up to 115200 baud.
- Customizable EDID table.
- Easily expandable – add receivers as you add control stations.
- Mounting brackets included for easy surface/wall mounting.
