The
Linx-Fob5 is a miniature 5 button transmitter that when used with the
Linx-Rx or
Linx-Tx8 form an eight channel short range wireless link. The 1/4 J6 output from the
Linx-Rx can be used directly to run small relays and solenoids, or fed into any of Gilderfluke's relay modules to control higher current/voltage loads. Most commonly, the output of the
Linx-Rx is used to start a sound or show playing on a Gilderfluke audio repeater or show controller.
- Linx-Fob5:
- Five button keyfob transmitter
- FCC Part 15, Canadian, and CE certified
- Allows access to five of the outputs of the Linx-Rx
- Smaller in size, but slightly shorter range than the Linx-Tx8
- Uniquely addressable to one of millions of addresses using a dipswitch
- Uses a standard ‘watch’ battery for power
Linx-Rx:
433 MHz band short range wireless reception from pocket-sized transmitters
Up to eight outputs can be used to control relays directly, or plug into the 1/4 J6 input of a Br-Brain4 or Sd-50. Can be used to trigger any other Gilderfluke equipment through their optoisolated inputs
Draws power through the 1/4 J6 output
Indicator LEDs show data being received
Plastic enclosure can be mounted remotely, to optimize radio reception
Uniquely addressable to one of millions of addresses using a dipswitch
Runs on any voltage from nine to twenty-four vdc
Linx-Tx8:
Eight button pocket-sized transmitter
FCC Part 15, Canadian, and CE certified
Allows access to all eight of the outputs of the Linx-Rx
Larger in size, with slightly longer range than the Linx-Tx5
Uniquely addressable to one of millions of addresses using a dipswitch
Uses a standard ‘watch’ battery for power
Package Contents:
1 - Linx-Fob5
1 - Gilder CD w/Software & Manuals
